Yadda Ake Sauya Injin Gyaran Tsutsa a Bawul

Menene Mai kunna kayan aiki na tsutsa

A mai kunna tsutsaNa'ura ce ta injiniya da ake amfani da ita don sarrafa bawuloli da hannu ko kuma sarrafa su ta hanyar mota, musamman nau'ikan bawuloli masu juyawa kwata-kwata kamar bawuloli masu malam buɗe ido da bawuloli masu ƙwallon ƙafa. Tana amfani da tsarin tsutsa-da-ƙafa don rage ƙarfin shigarwar da ake buƙata yayin da take samar da takamaiman halaye na sarrafawa da kulle kai.

Kayan aiki da kayan aiki da ake buƙata

• ①Fitattun maƙura da saitin soket

• ②Masu Sukru

• ③Maɓallan Allen (idan ya dace)

• ④Man shafawa mai hana kamawa

• ⑤Makullin karfin juyi

• ⑥ Kayan aiki na ɗagawa (ga manyan masu kunna wutar lantarki)

• ⑦Mai sauya kayan aiki na tsutsa (tare da cikakkun bayanai masu dacewa)

• ⑧Safofin hannu na tsaro da PPE

Kariya daga Tsaro

• ① Raba bawul ɗin: Rufe layin tsari kuma rage matsin lamba a tsarin.

• ②Kullewa da kuma cirewa (LOTO): Hana kunnawa ba zato ba tsammani.

• ③ Goyi bayan bawul ɗin idan babba ne ko kuma an ɗora shi a cikin bututun da ke tsaye.

• ④ Sanya kayan kariya don hana raunuka daga gefuna masu kaifi ko sassan da suka faɗi.

Mataki-mataki: Yadda ake Sauya Mai kunna Worm Gear

Mataki na 1: Yi alama a Matsayin Bawul

• Yi rikodin matsayin bawul ɗin a buɗe/a rufe don sake shigar da sabon mai kunna wutar a daidai wannan yanayin.

Mataki na 2: Cire haɗin Actuator

• Cire duk wani haɗin injina, ƙusoshin haɗawa, ko haɗin shaft ɗin tuƙi.

• Idan na'urar kunna wutar lantarki ta yi girma ko kuma tana da injina, yi amfani da injin ɗagawa don hana rauni ko rashin daidaito.

Mataki na 3: Duba Tushen Bawul

• Duba sandar bawul don ganin tsatsa, lalacewa, ko rashin daidaito.

• A tsaftace tushen kuma a shafa sinadarin hana kamawa idan ana buƙata.

Mataki na 4: Sanya Sabon Mai kunna Worm Gear

• Daidaita sabon mai kunna wutar lantarki da sandar bawul da flange.

• Yi amfani da tsarin bolt da ƙarfin juyi daidai da ƙayyadaddun bayanan masana'anta.

• Don bawuloli masu flange na ISO 5211, tabbatar da cewa murabba'in tuƙin ya dace da ramin tushe.

Mataki na 5: Daidaita Kusoshin Tsayawa da Tafiya

• Yi amfani daƙusoshin tasha na tafiyaakan na'urar kunnawa don daidaita iyakokin buɗewa/rufewa.

• Yi amfani da tayoyin hannu don duba cikakken wurin da aka buɗe da kuma cikakken wurin da aka rufe.

Mataki na 6: Gwada Haɗawa

• Kewaya bawul ɗin da hannu don tabbatar da aiki mai santsi.

• Sake haɗa injin ko sassan sarrafawa idan ana amfani da na'urar lantarki ko ta hanyar amfani da pneumatic override.

Mataki na 7: Dubawa na Ƙarshe

• Daure dukkan fasteners ta amfani da makullin karfin juyi don tantancewa.

• Tabbatar cewa kibiyoyi ko lambobi masu nuna alama sun yi daidai da ainihin wurin bawul ɗin.

• Sauya duk wani murfin, kariya, ko tags.

Yaushe Ya Kamata Ku Sauya Mai Aiki da Worm Gear

• ① Juyawar baya ko ɓacewar motsi

• ② Tsatsa ko tsatsa a gidan mai kunna wutar lantarki

• ③Rashin iya buɗewa ko rufe bawul ɗin gaba ɗaya

• ④ Lalacewar kayan aiki na ciki ko kamawa

• ⑤Girman Actuator bai sake dacewa da buƙatun tsarin ba

Me yasa Zabi Masu Aiki da Miyagun Ƙwayoyi na I-FLOW

A Qingdao I-FLOW, muna ƙera na'urorin motsa jiki masu inganci don amfani a cikin ruwa da masana'antu. Na'urorin motsa jiki namu sune:

• ① Mai jituwa da ISO 5211

• ②An gina shi don yanayi mai tsauri (akwai rufin da ke jure lalata)

• ③Akwai a cikin nau'ikan hannu, shirye-shiryen mota, da kuma masu hana ruwa

• ④An kawo shi tare da kayan haɗin da suka dace don malam buɗe ido na I-FLOW da bawuloli na ball

• ⑤An tabbatar da DNV, ABS, CCS, da sauransu don amfanin ruwa